Liam's Handyman Services LLC (339) 201-1993
Active Field Availability • Weymouth & South Shore

Direct trade carpentry and structural home maintenance for South Shore properties.

Hands-on repair scopes by Liam Donald McNeil. We cut out rotten sill plates, hang true interior doors, sister compromised floor joists, and rebuild water-damaged exterior trim across Weymouth and Norfolk County. Labor is billed by transparent hourly tiers and scheduled block sessions with zero synthetic markup.

Book Inquiry Desk View Labor Rates Run Fit Checker
Registration Fact Liam Donald McNeil Sole owner, operator, and lead contractor on site. Trade active since 2010 under Massachusetts residential contracting records.
Operating Base 5 Veronica Ln, Weymouth Dispatching to Weymouth, Quincy, Braintree, Hingham, Rockland, and Abington. Minimum call-out: 1–2 hours.
Transparent Billing $60–$110 Hourly Band No artificial flat-rate estimates designed to bury extra labor. Time on tools tracked on clean line-item work sheets.
On-site framing calibration: Measuring Douglas fir headers and structural framing clearances inside a Norfolk County residential renovation.

Transparent labor rates, call-out baselines, and booking blocks.

Most homeowners in Norfolk County struggle to get a straight answer on what trade repairs cost before someone drives up their driveway. We publish our complete rate schedule openly. Labor is billed by the hour or by defined 4-hour and 8-hour blocks. Hand tools, fasteners, shims, adhesives, and blades come off the van. Finish materials and custom fixtures are purchased by you or billed directly at store receipt without hidden markup.

Hourly Maintenance & Punch List
Minimum visit: 1–2 hours
Targeted latch adjustments, weather-stripping, subfloor screw-downs, small drywall repairs, cabinet hinge resets, and light carpentry punch items.
$60–$110 / hr
Half-Day Scheduled Session
Continuous 4-hour block
Dedicated 4-hour single-focus push. Hanging 2 to 3 interior pre-hung doors, rebuilding an exterior storm door casing, or patching and feathering a damaged ceiling.
$250–$450 / session
Full-Day Structural & Carpentry Block
Continuous 8-hour block
Heavy structural work: sill plate remediation, sistering rotted floor joists, replacing rotted cedar rake boards, or rebuilding water-damaged subfloors.
$450–$800 / day

What Determines Where Your Project Lands in the Bracket

Pricing within each bracket depends on physical site conditions: accessibility of framing behind existing finishes, crawlspace versus second-story ladder staging, structural rot severity, age of house framing (balloon framing versus platform), and urgency. Every scope item is reviewed before tools hit timber.

Van Inventory Loadout Supplied Free Fasteners, structural screws, framing nails, shims, construction adhesive, polyurethane caulking, abrasives, and blade wear are covered by the labor rate.
Materials Policy No Material Surcharges Pressure-treated sill lumber, engineered joists, PVC boards, and pre-hung doors are billed at true supplier invoice price.
Scheduling Advance Booking Only Sessions are booked in discrete half-day or full-day slots so your job receives full undivided attention without mid-day departure to another site.

Determine your scope feasibility, labor session, and pricing bracket.

Before you book an inquiry, run this diagnostic tool. It mirrors the exact evaluation Liam Donald McNeil uses when fielding project requests. Select your repair classification, adjust the estimated work duration, verify your South Shore location, and check material readiness to see the recommended session type, pricing bracket, and scheduling feasibility.

Interactive Job-Scope & Labor Checker
Calculates session classification and labor bracket from task hours and project parameters. Formula: <2.5h = $120–$220 (1–2h min); 2.5–5h = Half-Day ($250–$450); 5.1–9h = Full-Day ($450–$800); >9h = Multi-Day ($450–$800/day).
Calculated Feasibility & Labor Session
Half-Day Session (4 Hours): $250–$450
Standard 4-hour scheduled block suits 1 to 2 door casings or targeted punch list items in Weymouth. Includes van fasteners, ladder, and saw setup.
Eligible for Single-Day Scheduling in Immediate Dispatch Zone
Transfer Scope to Inquiry Form
Figures represent transparent labor brackets. Final non-binding estimate confirmed after reviewing photos and physical house framing conditions.
Checker Logic Formula Attribution Calculations directly match operator rate disclosures: $60–$110/hr with 1–2h minimum call-out ($120–$220), $250–$450 half-day, and $450–$800 full-day.
Town Clearance Weymouth & South Shore Jobs located outside of Norfolk County or over 25 miles from Weymouth are declined to preserve prompt scheduling for South Shore clients.

Technical plate: Coastal sill plate remediation & framing cutaway.

Coastal New England weather wrecks exterior wood framing. When cedar shingles or clapboards run tight against grade or foundation granite without a proper capillary break, moisture gets trapped behind the drip cap. The sill plate rots from the inside out. We don't skim caulk over rotten framing. We support the wall studs, cut the decay back to sound grain, install pressure-treated sill plates bolted to the foundation, and seal the envelope with self-adhered flashing membrane.

Technical Detail Plate • MA Coastal Sill Restoration
Tolerance: 780 CMR Residential 9th Ed. / 1/2" Expansion Anchor Spacing
Structural sill plate repair with moisture barrier flashing and clean timber cuts
1. Structural Shoring Temporary screw jacks and double 2x6 ledger support wall load while rotted sill section is cut away.
2. Pressure-Treated Sill Ground-contact rated 2x6 timber isolated from concrete/granite foundation by closed-cell sill seal foam.
3. Self-Adhered Flashing Heavy butyl tape flashing overlaps foundation shelf with z-flashing drip cap under bottom clapboard course.
1. Load Path Shoring Hydraulic or screw jack temporary load relief before cutting rotted timber.
2. Sill Anchorage 1/2" galvanized foundation expansion anchors torqued to manufacturer spec.
3. Flashing Layer Continuous weather-resistive barrier shingle-lapped over rigid aluminum drip edge.
Inspection Standard Moisture Meter Check We test surrounding rim joists with a pinless moisture meter. Framing above 18% moisture content must be dried or cut out before cladding is re-hung.
Fastener Spec Stainless Fasteners Exterior trim and shingles in coastal zones are secured with 304 or 316 grade stainless steel ring-shank nails to prevent galvanic corrosion.
Why Caulking Fails Trapped Condensation Slapping exterior silicone over rotted cedar stops evaporation, accelerating fungal decay inside wall cavities.

Trade capabilities, equipment loadout, and work methods.

Liam's Handyman Services LLC handles physical trade repairs that require precision carpentry, framing knowledge, and proper mechanical fasteners. We do not do interior decorating, lawn care, or major permitted mechanical overhauls. We specialize in structural fixes, punch lists, door hanging, subfloor remediation, and exterior weather envelope maintenance.

Structural Rot & Subfloor Sistering
$450–$800 Full-Day Block
Repairing soft bathroom subfloors, sistering water-damaged floor joists under plumbing penetrations, and cutting out rotted exterior corner boards. We jack joists back to level where structural framing permits and bolt new dimensional lumber using structural construction adhesive and through-bolts.
Tolerances Floor levelness within 1/8" over 10 feet. Fastened with Simpson Strong-Tie structural screws.
Lead Time Scheduled 1 to 2 weeks out. Full 8-hour dedicated block.
Interior Door & Casing Installation
$250–$450 Half-Day Session
Hanging solid-core or hollow-core interior pre-hung doors, mortising hinges, adjusting strikes, and installing colonial or flat-stock casing. We plumb jambs using wood shims and 2-1/2-inch finish nails driven into framing studs, ensuring doors swing smoothly without drifting.
Margin Gaps Uniform 3/32" reveal around jamb perimeter. Latch bolt engages strike plate with zero rattle.
Pace 2 to 3 interior doors hung and trimmed per 4-hour half-day session.
Drywall Patching & Surface Remediation
$60–$110 / hr (2 hr min)
Remediating drywall ceiling cutouts from completed plumber repairs, door knob punctures, and settlement cracks. We install solid timber backing, screw new gypsum board flush, bed paper or mesh tape in setting-type joint compound, and feather edges across two skim coats ready for primer.
Finish Level Level 4 smooth drywall finish feathered 8 to 12 inches past joint perimeter.
Prerequisite Active leaks must be 100% repaired and framing dried before patching begins.
Organized contractor work van interior loaded with Milwaukee crates, miter saw, and ladders
Tool Inventory Loaded Service Van Includes Milwaukee cordless tools, DeWalt compound miter saw, Fein oscillating multi-tools, drywall taping boxes, and 24-foot Werner extension ladders.
Scope Limits What We Decline We do not do roof tear-offs, furnace replacements, licensed plumbing rough-ins, or whole-house spray painting.

Contractor credentials, operating records, and verification.

Liam's Handyman Services LLC is owned and operated by Liam Donald McNeil, doing business historically as LHS Construction in Norfolk County. We maintain complete transparency regarding our business records. Our public registrations, Better Business Bureau directory entries, and past Massachusetts court filings are open matters of record. We do not hide behind anonymous front companies or subcontract your job to third-party gig workers.

Verified Business Record & Trade Disclosures

According to official Massachusetts state entity filings and consumer directory records, Liam's Handyman Services LLC has faced historical contract disputes and reflects inactive registration status in certain commercial databases. Inquiries submitted through this site are evaluated for targeted residential carpentry, handyman maintenance, and small-scope private contracts executed directly by Liam Donald McNeil.

  • Lead Contractor: Liam Donald McNeil, sole owner on tools since 2010.
  • Operating Address: 5 Veronica Ln, Weymouth, MA 02189 (Norfolk County).
  • Historical Trade DBA: LHS Construction (residential repairs and framing).
  • Contract Documentation: Written line-item scope agreements with explicit labor rates and material receipt billing.

Direct Customer Comparison Criteria

When comparing South Shore handyman services, always compare: hourly rate ($60–$110/hr), minimum call-out baseline (1–2 hrs), whether fasteners and consumables are included free from the truck, whether materials carry a markup, and who actually shows up at your door. With us, Liam Donald McNeil personally manages and performs your work.

Massachusetts contractor registration certificates, written estimate sheets, and project documentation on an office desk
Legal Basis Written Scopes Every repair block is confirmed in writing with task descriptions, estimated hours, and material allocations before work starts.
Payment Handling Payment on Completion Standard maintenance sessions are billed upon completion. We do not demand large up-front cash deposits for day-rate handyman maintenance.

Trade workflow: From inquiry intake to clean broom sweep.

We run our jobs with a disciplined physical routine. There is no guessing about arrival times or whether tools were forgotten. Here is exactly what happens when you book a repair session with Liam's Handyman Services.

Step Stage What Happens on Site & Desk Turnaround
01 Scope Intake & Photo Review Submit job details, address, and photos of framing, trim, or drywall. Liam evaluates feasibility, materials required, and assigns the appropriate session tier. Same business day
02 Schedule Confirmation Date and time slot confirmed on calendar. Written confirmation specifies labor rate band ($60–$110/hr or $250–$450 / $450–$800 session) and material shopping checklist. 24–48 hours out
03 Arrival & Surface Protection Truck arrives on site at scheduled hour. Floors protected with canvas drop cloths, tools mobilized, existing framing plumbed and checked with laser level. Morning of session
04 Execution & Cleanup Carpentry, rot cutting, door hanging, or patching performed to Massachusetts code tolerances. Site vacuumed and debris bagged into van. Final walkthrough with owner. End of session

Frequently asked trade questions

Trade Integrity No Upselling If a 20-minute hinge adjustment fixes your door, we will not try to sell you a $1,200 pre-hung jamb replacement.
Debris Removal Sweep & Haul Torn-out rotted trim and drywall scraps from our work are bagged and removed from your premises as part of standard session cleanup.

Direct inquiry intake desk & job scope submission.

Submit your repair details below. Liam Donald McNeil reviews every inquiry personally. You will receive a direct reply with scheduling options, session recommendation, and labor bracket confirmation.

Please provide your full legal name or property contact name.
Please enter a valid telephone number with area code for call-out confirmation.
Please enter a valid email address so we can forward work scope confirmations.
Please enter the job site address in Weymouth or surrounding South Shore towns.
You must acknowledge and accept our service inquiry terms to submit.
Shop Dispatch & Operator Facts
Legal Entity Liam's Handyman Services LLC DBA LHS Construction (Historical)
Operating Principal Liam Donald McNeil Owner & Lead Contractor on Tools
Physical Address 5 VERONICA LN, WEYMOUTH, MA 02189 East Weymouth • Norfolk County
Direct Telephone (339) 201-1993
Electronic Mail [email protected]
Standard Rates $60–$110 / hr $250–$450 Half-Day • $450–$800 Full-Day
Hours of Operation Mon–Fri: 7:30 AM – 4:30 PM Scheduled Visits by Appointment